SMD LED uses a special high thermal conductivity metal ceramic (ltcc-m) substrate. High hot metal Ceramics (ltcc-m) composite substrates such as: high-power LED ceramic substrate, its main features are as follows: 1. Heat conduction resistance 2. Thermal expansion coefficient match (TCE: 6.2) 3. Anti-UV4. Corrosion and yellowing 5. RoHS Compliance 6. High gas tightness 7.
Top ten advantages of SMD LED
First, small size: SMD LED is basically a small chip is encapsulated in the epoxy resin inside, very small, convenient for a variety of light source equipment design.
Second, pure color: SMD LED light color pure, soft, no glare, SMD LED both as decorative uses, can also be used for lighting purposes.
Third, low heat: Single SMD LED power is very low, generally 0.04~0.08W, and light efficiency, so the calorific value is not high. Therefore, LED lamps and lanterns can be used as decorative lighting in the aquarium, SMD LED and not produce a lot of heat caused by water temperature rise, affecting the growth of ornamental fish.
Four, energy-saving: High light efficiency, low calorific value of the LED components to create super energy-saving, LED lamps compared to traditional lighting and decorative lamps, LED lighting power is several times lower, but the effect is still high.
Five, low radiation: no ultraviolet and infra-red in the spectrum, no heat, no radiation, small glare, cold light source, can be safely touched, SMD LED belonging to the typical green light source
Six, environmental protection: LED soft lamp composition material whether LED or FPC, its material is the use of environmentally friendly materials, is recyclable, not because of the large number of use caused by environmental pollution and destruction.
Seven, low demand: SMD LED voltage is very low, can be a few number of light source with a linear constant-current drive can be perfect to achieve efficient and safe and stable led work.
Eight, fast response: Blue-jin SMD led no need to warm the lamp time, SMD LED sensitivity about 10^-9 seconds, so that it can be used in a variety of high-precision testing equipment.
IX, rugged: LED is fully encapsulated inside the epoxy resin, stronger than bulbs and fluorescent tubes. The lamp body also does not loosen the part, causes the LED not to be easy to damage.
Ten, long life: LED lamp normal service life is $number million hours, SMD LED 24 hours a day non-stop work, its life expectancy nearly 10 years. As a result, the life expectancy of LED lamps is several times that of traditional lamps.
- The Advantages Of LED Display Screen
- LED Display Superior Performance
- Characteristics Of LED Display Screen
- Blu-ray Function And Characteristics Of Intelli...
- Role Of LED Display Screen
- LED Heat Causes
- LED Heat Sink Solution
- LED Wash
- How To Tell Quality Of LED Screen
- LED Display Future Trend
- Optical Coupling Has Strong Common-mode Inhibit...
- LED Light Bar Stability Excellent
- SMD LED Has Many Models
- Application Of Optocoupler In Telephone Securit...
- LED Infrared Lamp In The Field Of Security Moni...
- SMD LED Is A Cold Glow
- Fast Optocoupler Response Speed
- Long Service Life Of LED Infrared Lamp
- Optocoupler Has Good Electrical Insulation Capa...
- LED Light Bar A Wider Range Of Applications