Product Description
1. PLCC LED dimensions: 3.5(L) x 3.5(W) x 1.89(H) mm
2. High intensity
3. Extremely wide view angle
4. Anti-electrostatic tape package
5. Reliable and stable
Specification
1. Package Dimension
NOTES:
1. All dimensions are in mm.
2. Tolerance is ±0.25mm unless otherwise noted.
2.Absolute Maximum Ratings(Ta=25℃)
Parameter | MAX. | Unit |
Peak Forward Current | 700 | mA |
Continuous Forward Current | 350 | mA |
Reverse Voltage | 5 | V |
Operating Temperature Range | -25℃ to +85℃ | |
Storage Temperature Range | 40℃ to + 100℃ | |
Lead Soldering Temperature | 260℃ for 3 Seconds |
3. Electrical-optical characteristics(Ta=25℃)
Parameter | Symbol | Min. | Typ. | Max. | Unit | Condition |
Luminous Intensity | Lm | 110 | -- | 120 | LM | IF = 700mA (Note 8) |
Color Rnderinng lndex | CRI | -- | -- | -- | Ra | IF = 700mA |
TC | 6000 | 6500 | nm | IF = 700mA | ||
Viewing Angle | 2θ 1/2 | -- | 120 | -- | deg | IF = 700mA |
Forward Voltage | VF | 3.0 | 3.2 | V | IF = 700mA | |
Reverse Current | I R | -- | -- | 10 | μA | VR=5V |
1.All dimensions are in millimeter. Tolerance is ± 0.25mm(.01”) unless others otherwise noted.
2. maintains a tolerance of ±10% on flux and power measurements.
3.CCT ±5% tester tolerance and d ±1nm; X.Y Tolerance each Bin limit is ± 0.01
4.A tolerance of ±0.1V on forward voltage measurements
5.View Angle maintains a tolerance of ±20°
6.Specifications are subject to change without notice.
7.These products are sensitive to static electricity; high standard of care must be fully taken when handling them. Particularly if an over-voltage that exceeds the Absolute maximum Rating of these products were applied, the overflow energy will cause damage to and possibly result in destruction of these products. Buyer shall take absolute secure countermeasures against static electricity and surge when handling
these products.
8.Luminous intensity is measured with a light sensor and filter combination that approximates the CIE eye- response curve.θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
9.It use many parameters that correspond to the CIE 1931 2°
X,Y, and Z are CIE1931 2°values of Red, Green and Blue content of the measurement.
4.Typical Optical Characteristics Curves
Pls contact us for more details and discount about smd 3535 led emitting white, thank you!